​Polyurethane Isostatic Pressing Molds

Polyurethane Isostatic Pressing Molds 

The static pressure formation of powder is an emerging forming technology. It is commonly used as a medium (such as cymbal) as a medium, and is waited for static pressure without heating.

The process of cold and waiting for static pressure includes three steps:

(1) With the role of high -pressure pump, the fluid medium is pressed into the high -pressure steel seal container, and the static pressure of the high -pressure fluid directly acts on the powder in the elastic mold.

(2) The powder is evenly compressed in each direction at the same time, and the density distribution is evenly distributed with high -intensity.

(3) Remove the forming parts. The heat such as heat is the process of waiting for static pressure at high temperature. The method can also be sintered at the same time to make the material and workpiece close to the dense dense.

Advantages of isostatic pressing technology

1. The density of powder products is high, and the density of hot isostatic pressed products is >99.9%

2. The compact density is evenly distributed and can be pressed in one or two directions.

Isostatic pressing: The friction between the powder and the package is very small.

3. Ability to manufacture products with a large aspect ratio (length/diameter).

4. Produce complex-shaped and near-net-shape parts with high material utilization.

5. Produce products with excellent performance and low porosity, 0-0.00001%.

6. It is beneficial to handle toxic materials and wrap them in the mold.

7. No need or less use of additives, reducing pollution to the environment and products, and simplifying the process

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Rubber mold             Plastic mold               Polyurethane Product              Pu product