Isostatic Pressing Molds

Isostatic Pressing Molds

Isostatic pressing is to encapsulate the pre-pressed blank in an elastic rubber mold or plastic mold, and place it in a high-pressure vessel to apply high-pressure liquid to form a green body. This should be called wet isostatic pressing in detail. , which is a type of isostatic pressing method. This type is suitable for products with multiple varieties, complex shapes, small output and large sizes. In addition, there is another type of dry isostatic pressing. The mold of dry isostatic pressing is semi-fixed, and the blank is added and removed in a dry state. This method is suitable for long and tubular products with simple shapes. The isostatic pressing molding method of alumina ceramics is easy to make, has long life and low cost; it can form complex, large and slender alumina ceramic products that cannot be produced by ordinary methods, and the quality is good; the pressure effect is better than other The dry pressing method is good; you can use less or even no adhesive; it is not easy to deform.

  Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.

Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.

Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.

Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products             Pu Products                Rubber Mold              Plastic Mold