Isostatic Pressing Molds for Zirconia Ceramics

Isostatic Pressing Molds for Zirconia Ceramics

Isostatic pressing of precision zirconia ceramics

Isostatic pressing is a special forming method developed on the basis of traditional dry pressing. The pressure transmitted by the fluid is used to press the powder uniformly in all directions in the elastic mold. Due to the consistency of the internal pressure of the fluid, the powder is subjected to the same pressure in all directions, thus avoiding density differences in the compacts.

Isostatic pressing can be divided into wet bag isostatic pressing and dry bag isostatic pressing, wet bag isostatic pressing can form complex shapes of products, but they can only work intermittently. Dry bag isostatic press can achieve automatic continuous operation, but can only form square, round, tubular cross section and other simple shapes of the product. Isostatic pressing can obtain uniform dense green billet, sintering shrinkage, uniform shrinkage in all directions, but the equipment is complex and expensive, the production efficiency is not high, and is particularly suitable for material production requirements.

ISO Bags

     Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.

Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.

Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.

Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products             Pu Products               Rubber Mold              Plastic Mold