​Cold Isostatic Pressing Molds for ITO Targets

Cold Isostatic Pressing Molds for ITO Targets

ITO target has high performance advantages, and has relatively high heat shock resistance, which will not cause damage to the equipment in use, and its purity is high. At present, many electronic products in the market are used in flat displays, LCD computers, LCD TVS into thousands of households, LCD products are relatively high in appearance or in texture, and can reduce energy consumption.

ITO targets are widely used in various industries, and its main applications are divided into: Flat panel display (FPD) industry, such as thin film transistor display (TFT-LCD), liquid crystal display (LCD), electrically excited optical display (EL), electroluminescent organic flat display (OELD), field emission display (FED), plasma display (PDP), etc.; Photovoltaic industry, such as thin-film solar cells; Functional glass, such as infrared reflection glass, anti-ultraviolet glass such as curtain wall glass, automobile, aircraft anti-fog windshield, light hood and glass disk three major areas. But mainly used in flat panel display, it is the main raw material for sputtering ITO conductive film, without its existence, many materials will not be able to achieve normal processing and design. Due to its transparency to visible light and good conductivity, ITO film is also widely used in liquid crystal display glass, curtain wall glass and anti-fog windshield on aircraft and automobiles.

Cold isostatic pressing

The cold isostatic pressing method is to put the preformed blank into the rubber envelope and soak it under high pressure liquid to withstand isotropic pressure, so as to strengthen the density of the blank. Cold isostatic pressing only obtains the high density of the blank as possible, which makes the sintering densification of the blank easier. Because cold isostatic pressing does not have the sintering ability of hot isostatic pressing, it is necessary to fire the blank by vertical sintering process.

Cold isostatic pressing can press large-size targets, which is the preferred forming method for most enterprises. The internal and external forming studies show that high quality blank can be prepared by cold isostatic pressing to meet the needs of ceramic targets.

CIP Bags

Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.

Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.

Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.

Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products              Pu Products               Rubber Mold              Plastic Mold