CIP Molds for ITO Targets

CIP Molds for ITO Targets

From the perspective of ITO target preparation methods, there are various preparation methods, and the advantages of cold isostatic pressing are prominent. There are mainly four methods for preparing ITO targets, namely hot pressing, hot isostatic pressing, room temperature sintering, and cold isostatic pressing. The advantages of cold isostatic pressing method for preparing ITO target materials: 1) The pressure of cold isostatic pressing method is relatively high, and the force on the workpiece is relatively more uniform, especially suitable for pressing large-size powder products, which is in line with the development trend of large-size ITO target materials; 2) The density of the product is relatively higher and more uniform; 3) Pressed powder does not need to add any lubricant; 4) Low production cost, suitable for large-scale production.

  Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.

Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.

Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.

Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products             Pu Products               Rubber Mold              Plastic Mold