CIP Molds for Sputtering Targets

CIP Molds for Sputtering Targets

Main Applications of Sputtering Targets

Sputtering targets are mainly used in electronics and information industries, such as integrated circuits, information storage, liquid crystal display, laser memory, electronic control devices, etc.; they can also be used in the field of glass coating.

Classification According to the shape, it can be divided into long target, square target, round target, and special-shaped target. According to the composition, it can be divided into metal target, alloy target and ceramic compound target. According to different applications, it can be divided into semiconductor related ceramic target and recording medium ceramic target. Materials, display ceramic targets, ceramic targets and giant magnetoresistance ceramic targets, etc.; according to the application field, it is divided into microelectronic targets, magnetic recording targets, optical disc targets, precious metal targets, thin film resistance targets, conductive film targets materials, surface modified targets, photomask layer targets, decorative layer targets, packaging targets, and other targets.

The cold isostatic pressing method is to put the pre-formed blank into the rubber sheath and immerse it in the high-pressure liquid to make it bear isotropic pressure, so as to realize the strengthening of the density of the green blank. Cold isostatic pressing is only to obtain the green body with the highest possible density, which makes the sintering and densification of the green body easier. Since cold isostatic pressing does not have the sintering ability of hot isostatic pressing, an independent sintering process is required to fire the green body.

Cold isostatic pressing can press large-sized targets, and is currently the preferred molding method for most companies. Forming studies at home and abroad have shown that cold isostatic pressing can produce high-quality blanks that meet the requirements of ceramic targets. However, due to the limitation of the size of the chamber, the cold isostatic pressing will cause very expensive equipment investment, and there will be deformation problems when the green body is thinner and larger in size.

    Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.

Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.

Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.

Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products               Pu Products               Rubber Mold             Plastic Mold