Isostatic Pressing Ceramic Bags
The isostatic pressure technology applies PASCAL's principle to put the product into a closed ultra-high pressure container, and inert gases (nitrogen, argon, helium, etc.) transfer pressure uniformly on the surface of the product, so that the pressure is equal everywhere in all directions, and the four processes of dense consolidation, impregnation carbonization, diffusion connection and casting densification can be applied. It is used to improve product density, yield strength and fatigue properties, and eliminate casting defects.
Isostatic pressing is the most common advanced ceramic forming process, by putting the powder into the flexible mold or envelope, through the application of uniform pressure molding, is the most widely used and the most mature process, which is divided into dry bag isostatic pressing and wet bag isostatic pressing. Its characteristics are low cost, simple mold, high strength of green, but the size is not accurate, complex shape molding is difficult, wet bag type automation production efficiency is low.
Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.
Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.
Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.
Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.
We support all kinds of customization, if you need it, please contact us.
Phone/whatsapp:+86 18234744811
Email:sales@highindustryco.com
Rubber Mold Plastic Mold Polyurethane Products Pu Products
