With the isostatic moulding, it is possible to obtain shapes that are very close to the geometries of the finished parts that are intended to be obtained. This means that the material to be removed by means of mechanical machining will be less and this will have a positive impact on the production costs.
With the isostatic moulding, it is possible to obtain shapes that are very close to the geometries of the finished parts that are intended to be obtained. This means that the material to be removed by means of mechanical machining will be less and this will have a positive impact on the production costs.
Another important advantage of the isostatic moulding is that all the powder compaction phases is carried out under vacuum and this means huge qualitative benefits. The parts produced will be virtually free of porosity, giving the material superior characteristics in terms of mechanical and dielectric properties. In addition, the moulding takes place radially (from the outside to the inside or vice versa), and this gives a better uniformity of pressure transfer to the powder. The moulded part will have the same characteristics throughout its length, which is not the same achieved by compression moulding because of the friction of the powder against the mould walls.
Isostatic moulding requires the building of dedicated moulds for each geometry of the part to be realized (except for simple shapes), so it will be particularly advantageous for serial productions of at least some hundreds of pieces or more.
We support all kinds of customization, if you need it, please contact us.
Phone/whatsapp:+86 18234744811
Email:sales@highindustryco.com
