​Isostatic Pressing Molds

Isostatic Pressing Molds

Leakage of the isostatic mold is a problem encountered by some users during use. Water leakage will not only make the product scrapped, but also pollute the isostatic medium, which should be avoided as much as possible. The waterproofing of isostatic pressing molds requires good structural design, and the isostatic pressing rubber sleeve also needs to be of high quality to prevent it from breaking during use. Integrated solution to avoid missing out on everything in the design.

In the isostatic pressing process, the characteristics of the powder, the filling density of the powder in the mold, and the structure of the mold have a great influence on the performance of the formed body, and the structural design of the isostatic pressing mold is very important. In the specific implementation of the isostatic pressing forming process, it is divided into direct isostatic pressing forming and molding-isostatic pressing combined forming process, and the direct isostatic pressing forming process is divided into internal pressure method and external pressure method according to the direction of pressure. pressure method. The designs of the molding molds and packages corresponding to these different methods also have their own characteristics.

According to the pressure medium and forming temperature, isostatic pressing can be divided into cold isostatic pressing (the medium is liquid at room temperature) and hot isostatic pressing (the medium is gas, and pressurization and heating are carried out at the same time). The cold isostatic pressing molding method is mainly used. Therefore, the so-called isostatic pressing molding method refers to the cold isostatic pressing molding method.

Jiangsu High Industry focuses on the research and production of isostatic pressing moulds, customizes various dry bag and cold isostatic pressing moulds, adapts to different models of various manufacturers at home and abroad, and deeply understands the needs of various industries. Alloy, graphite and other industries provide high-performance isostatic pressing mold rubber sleeves.

Product overview: Isostatic pressing rubber mold is used for the molding of ceramic materials, tungsten and molybdenum materials, graphite materials, refractory materials, and alloy powders. It can be customized according to drawings, and can be designed according to samples.

Product features: The deformation of the elastic mold under the pressure of the liquid medium is transmitted to the powder in the mold. The friction between the powder and the mold wall is small, the blank is uniformly stressed, and the density distribution is uniform, and the pre-pressed blank is encapsulated. In the elastic rubber mold, it is put into the high-pressure cylinder after sealing, and the green body is compressed and formed by liquid transfer.

Product advantages: The design of the mold cover is reasonable to ensure no water leakage, the blank is well formed, and the service life is long, including the fixture for processing the blank, which can be customized! There is a free amount of open steel molds.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products              Pu Products                   Rubber Mold                Plastic Mold